![]() ![]() Then get your point spanner out and remove the winder by turning the top counterclockwise. First, remove the three silver crosspoint screws from the top - there are two on the sides and one on the back under the battery check button. The lines are bright and the frame auto-adjusts for parallax, but the field itself is a bit dark, and if its cloudy or dirty it’s just not happening. The Electro’s weak spot is a dim rangefinder. First Steps – Top RemovalĪt the very least you’ll want to get in and clean the rangefinder glass. ![]() Also good to have a lens brush and tissues for cleaning the glass when everything else is done. Possible other materials, depending on what you’re doing: small gauge wire, solder & soldering iron, needle files, black felt or foam, vinegar. Materials needed: a well lighted area, I also recommend a tray to work in or at least a paper towel to work on, jeweler’s screwdrivers, spanners, cotton swabs, Windex. Light seal replacement is detailed on another page. ![]() On this page I’ll run through a partial teardown so you can see how to get to the likeliest trouble spots, and describe how I fixed them on mine. ![]() You also know that they’re as common as they are inexpensive, and that they are as likely as not to have at least one age-related problem or another, so pick up a couple while you’re at it - one for parts, one for pictures. If you’re here, you already know that the Yashica Electro is one of the best picture-takers your lunch money can buy. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |